|
|
|
 | | Sliding ODFs & Patchcord Managers | High density termination system, for example 72 terminations in a 19" 4U space at 12 terminations per tray, based on SC, E2000, LC, FC/PC or ST connectors. Other connector types can be catered for.
Each tray accommodates 1 cassette, affixed in a non-hinging position. Fibre entry onto the tray can be via either fibre tubing or 10mm flexible conduit, routed from a centrally located Cable Breakout Unit (CBU)).
Fibre tubes enter at the rear left of the tray, and are secured to the cassette’s barbed anchor points with 2 cable ties. The conduit is usually push fitted into suitable conduit locators (10mm conduit) on the tray. In some instances, best practice principles require the combined use of both forms of retention at the fibre entry point. Each tray slides forward to a stop point to allow for either cassette or connector access. The tray can also be disengaged from the support shelf for more convenient for fibre splicing, routine maintenance, etc.
Cassette are manufactured using UL94-V0 rated CYCOLAC VW300. Exiting patchcords are routed directly over vertically mounted storage mandrels for full bend radius control. A variety of backplane heights are available, with bespoke requirements catered for.
| | Back... |
|
|
|
Active Devices