• sales@wrenuk.com
  • +44 (0) 1908 951000

Drop us a line

Cable Breakout Units

Cable_breakout_unit_6Way

Cable Breakout Units

The Cable Breakout Unit is designed to anchor an incoming cable and route the fibre tubes to individual patch panels or Optical Sub Units within the Optical Distribution Frame. Each Cable Breakout Unit is provided with central tension member anchorage. The Cable Breakout Unit is made up of a base, lid, compression gland, CTM clamp and flexible copex tubing. Each 10mm outer diameter copex tube can accommodate two unitubes, typically containing up to 12 fibres each. Typically used where loose tube cables are more suitable and cost effective

  • Comprehensive range of sizes to suit application including 4 way, 8 way, 12 way, 16 way and 24 way as standard
  • Based around 10mm outer diameter copex tubing. Each copex tube can take up to 2 unitubes, allowing up to individual fibres to be routed to each panel
  • Slots are designed to retain copex securely
  • Trunk cable is secured using a standard compression gland (varying sizes - see ordering information)
  • Supplied with central tension memeber clamp for securing the strength member of the cable (up to 7mm diameter)
  • The Giant Breakout Unit can accommodate up to 6 individual cable entry points and 36 copex tubes providing cable breakout for large capacity Optical Distribution Frames in cross-connect applications
  • Safe secure transition between cable and panel where it is not possible to route the cable directly to the tray
  • Copex tubes are secured quickly without compression or tightening of screws
  • Can be fixed using cage nuts to side of rack, back board or wall
  • Also integrates with 1U Fibre Craft Tray and Optical Distribution Frame 4-way and 6-way back plates enabling the Cable Breakout Unit to be mounted sideways on the rear of the panel or back plate where the access to the bottom or side of the rack is limited

MCO0039                4-Way Cable Breakout Unit

Supplied with M20 compression gland (cable diameter min 7.5mm/max 11.3mm) and 4 metres of copex tubing as standard

No. Copex Tubes

Maximum Fibres (2 Unitube x 12 fibres each)

Up to 4

Up to 96

 

MCO0027                8-Way Cable Breakout Unit

Supplied with M25 compression gland (cable diameter min 10.8mm/max 15.8mm) and 8 metres of copex tubing as standard

No. Copex Tubes

Maximum Fibres (2 Unitube x 12 fibres each)

Up to 8

Up to 192

 

MCO0277                12-Way Cable Breakout Unit

Supplied with M25 compression gland (cable diameter min 10.8mm/max 15.8mm) and 10 metres of copex tubing as standard

No. Copex Tubes

Maximum Fibres (2 Unitube x 12 fibres each)

Up to 12

Up to 288

 

MCO0013                16-Way Cable Breakout Unit

Supplied with M25 compression gland (cable diameter min 10.8mm/max 15.8mm) and 12 metres of copex tubing as standard

No. Copex Tubes

Maximum Fibres (2 Unitube x 12 fibres each)

Up to 16

Up to 384

 

MCO0278                24-Way Cable Breakout Unit

 

Supplied with M25 compression gland (cable diameter min 10.8mm/max 15.8mm) and 16 metres of copex tubing as standard

No. Copex Tubes

Maximum Fibres (2 Unitube x 12 fibres each)

Up to 24

Up to 576

Part Number

Description

10-00009

Rear Copex Mounting Clip

MAC0020

Copex Tubing (per metre)

MCO0205

Rear Mount c/w 24 x SC/APC Pigtails and Adaptors

MCO0157

Rear Mount c/w 24 x SC/PC Pigtails and Adaptors

MCO0292

Rear Mount c/w 24 x LC/PC Pigtails and Adaptors

MCO0293

Rear Mount c/w 24 x FC/PC Pigtails and Adaptors

MCO0256

Craft Tray c/w 24 x LC/PC Pigtails and Adaptors

MCO0290

Craft Tray c/w 24 x SC/PC Pigtails and Adaptors

MCO0268

Craft Tray c/w 24 x E2000/PC Pigtails and Adaptors

MCO0215

Craft Tray (2 Tray Module) c/w 48 x SC/APC Pigtails and Adaptors

MCO0003

4 Way Rear Mount Back Plate

MCO0075

6 Way Rear Mount Back Plate

MCO0077

4 Way Front Mount Back Plate

MCO0291

6 Way Front Mount Back Plate


Related Products

Translate »